Recent content by Chuckanut

The math for 1.1 works out but in overdrive (gear venders) it’s said 51.88 but I’m doing 45mph is that just torque converter slip?

Never mind your right, thank you for explaining

Yea we used that too

Sure buddy

I have a a tach hooked up to the alternator, and we double checked the tach in the truck with a handheld one

Hello everyone I need help from people that have a tach in there truck and have stock gearing/tire size with the stock th400 or if they swapped to a sm465 I have a gear venders in the truck and at 2000rpm at .78 OD in going 45mph. In 1 to 1 in going 35mph at 2000 rpm A rpm calculator said im...

Hey guys i’ve been trying to find some answers. I asked around on Facebook and on other forms and everyone says that there are tons of threats already…….. but I’ve been looking and I haven’t found one even for a 6.2 or 6.5 turbo. My question is has anybody on here used water methanol injection...

Does the small bock down pipes fit the hangers?

Hey guys I was wondering if I can use 454 down pipes on my m1028? I read that you can but I thought I would ask. I just want the front half of the exhaust to be smooth bends and not that rinkle bend stuff

I have a m1028 1986 th400/208/456gears with the stock 235/85/r16 tire size. According to rpm calculators at 3000 RPM I should be going a little over 60 miles an hour. I’ve also been told that there are individuals doing 65 miles an hour at 3000 rpm i’m doing 35 miles an hour at 2000 RPM i’ve...

As far as I know, I’ll get her vendors only has one gearing ratio, and that As far as I know, I’ll gear vendors only has one gearing ratio, and that’s .78

I installed a tack onto my alternator and as far as I can tell, it’s reading correctly at idle it’s at 650 High idle around 800 and 35 miles an hour I’m doing around 2000 RPM without overdrive with overdrive I can do 45 miles an hour at 2000 RPM

Do you have a stock setup with gearvenders?

Yes, you can feel the overdrive kicking in and you can see the RPMs drops

Hey guys, I recently installed a gearvenders over drive into my truck stock 456 gears and 235/85/r16 tires I love the set up my only issue is I found a post on here that said that with the overdrive turned on but he was doing 45 miles an hour at 1800 RPM or something like that and 75 miles an...