Recent content by DREDnot

Thanks for an update. Im in negotiations to try and obtain ITV78. So ive been going through Greg's videos with great interest. Also wondering if there any "out and about" type things going on. Mods, upgrades, stuff like that. I see you on Growler Forum but you seem to be one of the few active...

Pic of mine for reference...

You need to know the part number that is on your flasher. Having LED headlights or not isnt an issue as far as the flasher unit is concerned. Neither are marker lights. Its just the bulbs that would flash will need the correct flasher unit to work properly. If you replace the bulb in the green...

When these things first hit the auctions and got into buyers hands there was increasing activity and some forums sprang up. I know production numbers were only in the triple digits but most content on them is 3 to 5 years old now...nothing recent. Thank goodness Greg Rasmussen took the time...

Anyone else? Wondering what specifically was involved?

Military Vehicle Show at Buckeye Air Fair this weekend Feb 13-15. I got there early thursday to snag a good spot before all the flatfenders got there.

I could never get my hand in and bent around backward to undo the hose at the bulkhead fitting. I recommend sucking it up and removing the stack. That way you can replace the leaking parts and give a good cleaning between the radiators that cant really be seen or done any other way. Once you get...

I believe the mil-spec lug nuts have lock nut feature like most of the nuts on these trucks. Ive never seen them be able to spin down by hand even when new. Best practice I've used is to tough it out with a long-handled ratchet or breaker bar. Using and impact gun on them seems to cause them to...

Yeah the drivers mirror used to be up on the windshield frame where it blocks visibility to the 10-11 o'clock direction horribly. Mine was upgraded to a MAK and had the lowering holes already present. It looks goofy like that but i can see pedestrians when turning left now. I think the door...

Whats the front side look like? If you didnt remove the seat belt assembly I cant see how its on there correctly?

If you set the mirrors per the TM instructions the doors dont hit them. They will also fold forward or backward for tight clearances. I got mine new complete from AM General for a little more than the chinese knockoffs. The chinese kits have a solid disc instead of the detented folding...

While the pull cable with metal valve is most convenient, the valve has a less than perfect seal and does not stop the hot water 100% If you only need heat seasonally and maximum A/C the rest of the time I get best results using a manual ball valve for complete sealing. The original electric...

Post a picture of your center cross bow. I'm wondering if maybe you got yourself an ambulance cross bow which is way too tall

You may have your top's rear grommets fastened one stud over from center? I cant see it even fitting this way but its just a thought

Start by making sure the top is tight along the top of the B-pillar. You need to remove the upper seat belt attachment and pad assembly first. You aren't missing any of the twist locks and they are in the correct place. The front and rear grommets attach to the same (lower) twist lock stud...