Recent content by duanejacques

We still have a new 2100AB in the ESD wrapping. My email is riverbadboy@gmail.com

Eventually on a lowboy. I probably will figure it out soon. It arrived yesterday. Thank you and everyone for the response. I will update for sure

Mechanical

It was missing the cross exhaust pipe from turbo to the rest of the exhaust. Im now thinking that maybe the usmc had a problem with it

I should have mentioned that I have a power loss as this happened

Anyone who might be able to discuss a problem with a Humvee 6.5 Turbo that we are commuting from Arizona to Michigan? It was running great all the way to Northern Utah. Soon after it began blowing so.e amount of black smoke. I've looked at the turbo and rest of the exhaust, air filter and...

no cdr valves. i stuck with the stock hi back seats. most were in great condition. i looked mainly at Yermo Ca. i also recieved the new Revision motors and trans. All were not running and had zero fluids in them. It was like they installed everything but were going to store them until meeded is...

welcome. yes it has been the same for me as ive aquired a M1151A1 {2 of them} M1552c {made from an original M1152A1} and a M1114A1. It wont take you long to get into the swing of things. Any help you need would be found in this site since there are a lot of great people to help you.

I will definitely check that. I do have a new exhaust system that the gov must have installed that is mounted too close to the drive shaft. I've noticed a bunch of wire harness issues that seem routed incorrectly and too close to moving and hot parts. They installed a brand new MTP motor and...

Just banging my head trying to figure out what would cause the 12v wire to the Transmission Control Module to read 6.7vdc. I've checked and cleaned up the battery posts and 12v connections. With the 2 12v wires that attach to the 12v feed one wire reads 12v and the larger one shows around...

I have 2 extra 2100-AB transmission control modules that we picked up. They are still in the packaging if you need one.

Sorry it's been a while, so finally, I had a good 12 code flash for the transmission control module test. I have also found a couple of other things wrong, e-brake was dragging, and I re adjusted the TPS at the IP. I have also changed the Transmission Control Module 2100-AB to a new date...

I'm thinking A0? It's a 1996

yes my truck is the 1996 i beiive that it is the A0 ?