Recent content by goldneagle

Done with the Land Cruiser. Just need to clear coat.

I cut the mirrors on the scroll saw from 4.5mm walnut board. I used a hand held rotary tool to shape it further. I do a lot of shaping using the rotary tool. (mini Dremel) https://www.amazon.com/dp/B08VHYX96W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 It is smaller than the Dremel tool ...

I need to finish the wheels and clear coat the Toyota Land Cruiser.

The Toyota Land Cruiser is really shaping up.

Almost finished the well water project.

https://www.amazon.com/dp/B07LGKHW5R?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_12&th=1 Gorilla Wood Glue, Natural Wood Color. It dries transparent and it's very strong.

Made some good progress again today on the Toyota Land Cruiser. I got the wheel fenders/flairs sanded and fitted. I just need to round the edges and glue into place.

Made a lot of progress on the Toyota Land Cruiser today.

I started working on the Toyota Land Cruiser today.

Got some new heavy duty clamps for the shop. Fabricated a rack for them and their accessories.

Finished installing and painting the counterweights. Last picture is with shorter bolts installed.

Found this Youtube video of a guy building a 1/6 scale metal RC tank from scratch. It's a long video but amazing skills.

I added 300 pounds of lead plus the weight of the platform.

I will use either all-thread or bolts. 2 on each stack attached to the steel platform.

Finished pouring the lead plates for the excavator. Everything went smoothly. This time I removed the sheetmetal skirt from the mold to remove the plates. Made it a lot easier to get the plates separated from the mold.