Recent content by paramilusmc

It was the fuel level switch. Thanks Guyfang

Anyone got a lead on where I can find one of these? E-bay is a bust. Google is a bust. E-mailed big Mike and waiting to hear a response. Thanks in advance.

Nope, pre-heat doesn't pop it.

OK, disconnected the auxiliary fuel pump, same results. I ran the unit manually with fuel poured into the filter housing and cracking the bleed valve so that it could eat without creating a vacuum, but without being able to turn the switch to run without the breaker tripping only allowed this...

First off, this may not be a (B) series MEP-016, it has a Yanmar engine so it's probably a (C) model. Anyways... Unit was running great then all of a sudden shut down on its own. Found the DC circuit breaker was tripped. So reset it, flipped the main switch to its first position (Aux fuel)...

Will do

Your the best, thank you.

Cant find anything online about this PVI diesel water heater. I can find the TM # but nothing else, not even an "M" designation. If anyone has a copy or can supply a copy of the TM here, it would be much appreciated. Here is some additional information about the unit I am looking for...

Did a search and read the TM and couldn't find the size of the rivets. I'm buying a rivet tool and just want to make sure I am getting the right size tool for the job. Thanks

So master cylinder rebuild fixed the geyser problem. Now I have a leak somewhere else int he system where air is getting in. So ya, fun fun.

Yup, that is how I adjusted mine. It happens with both air in the system and no air in the system.

NOS, bought from Big Mike

Well yes, but the system didn't have any fluid in it to begin with.

Yup, that's how they were adjusted.

Yes but only when letting off the pedal. Comes out the top yes. I will check