Recent content by RockyP

Hi there is been a while my father’s really sick and I take care of him so sometimes I have do that and can’t get on here or work on my Gen Set.. With that being said do I just connect the white wires together after I put a inline fuse on the black wire?

HAPPY VETERANS DAY GUYS…. THANK YOU FOR YOUR SERVICE, CONTRIBUTIONS, AND SACRIFICES CONTINUALLY… YOU ALL ARE GREATLY APPRECIATE….. 🫡🦾🫶🏾 ps sorry if I posted it in the wrong spot but still Thank You All

Hey guy how’s things going I hope all is well!! I kinda got frustrated the other day had to take a breather…. I went a printed the testing process for a few things.. I’m not a mechanic but with the TM and the knowledge you guys have given im going to give it another try… I went through the...

I have run it for testing for short periods have not really run it because of no power output.. And no I didn’t smoke then. Nothing new has happened just testing the terminal on the VR

Hey fellas is me again with an update on the testing!! I was finally about to get out and do some testing on my gen set.. upon testing I started up the unit and preceded to do the test on the VR and I see smoke comin from inside the gen set and I immediately shut it off!! Yes the smoke was...

Yes it does it goes to like 220 then drops back below 100…

Hey there and yes I tested it again I’m gettin 0’s

Welp I connected everything back and drum roll NO POWER STILL

Thanks 😊

Yes I did them one at a time.. the J5 the plug on the bottom half has numbers that I didn’t kno about..

Hey Hey Hey, I fixed the wires!! I had to disconnect the j5 and I noticed the pin has letters and I don’t want to hook it back up wrong!! Or does that matter?

I almost fainted do u think it’s fried or that I’ll need a new one?? I can’t afford this right now!!

🧐It looks like Q1 and Q2.. Not sure but I think that’s to the stator am I correct?? 😫😫 I hope I’m not correct!! As far as fixing the wires can i solder them??

I am about to trace them down to she where there go and let you know. Can I just tape the wires up?

Well I got to look at the J5 wires again and look what I found.. I don’t know how I missed this!! Could this b the problem? Its pressed up against the metal plate down there.