Recent content by Sipsoo

Thanks for the help, probably won't get to it until the weekend. Got that last minute holiday shopping to do.

So, I spent the weekend playing around with a couple different Ideas but first I took off the top to check the K1 relay had the same voltage in as out. I resprayed all the contacts with deoxit again just to be sure and let it dry out. Then I tried switching to 3 phase and checked all three legs...

I am new to these generators but have been reading up on previous post. I am aware of the switch behind the front panel that flips down. I have it selected on the 120/240 single phase output. I also have another generator that I use for 208 3 phase power. As I have said before, the...

Switch position is in the L3-L1. The lugs used are L1 and L3, the configuration worked for a couple of weeks. but now nothing for 240. I connected another wire for a 110 connection ON L1 and seems to work fine, plugged in 4 different items to it like a 2000W heater, chop saw and a couple of...

I Have a 803A generator that works fine for running single phase 110 and 208 for a couple of weeks but recently when I try to use it for 208 single phase I get a short circuit fault. Tried a couple of different 208 devices and they all tripped the short circuit. So I can rule out my machines as...