Recent content by taylorm2

Wow. I did watch your video in the other thread, have you done any further diagnostic work? Perhaps swap the planetary hubs back in? Your situation seems to be excessive, even when accounting for the loss of torque. I hope you find something (not expensive or catastrophic) that gets you fixed...

@Shakkles are you super heavy?

Got it, so what else would I need if I got the unit and bracket from you?

@that_one_alternator_guy any kits for a 3116 upgrade?

Awesome news!!

Any updates on 2.0 availability? @Xengineguy

Posting a quick update now that I’ve had some time to get parts in and troubleshoot this properly. Firstly, thanks @Ronmar for the video and explanation! This helped me identify where do start pulling air hoses and checking for pressure. My issue ended up being twofold. That inversion valve...

A0 truck I think. It is a 1998 with the cat 3116 engine and wtec 3

Thanks for the help! Is there a good part number for that unit?

Yes, parking brake is set, however I noticed air leaking from around the parking brake knob. Maybe it's not fully engaged? Which air line are you referring to, the air line (507) on the power unit?

I've got an issue with the cab tilt/spare tire/suspension mechanism that I can't find good guidance on in the TMs (TM 209-2320-365-20-2 is where I was looking). The backup manual pump works to raise/lower the cab and spare tire, however when I push in the PUMP button on the manifold nothing...

Lights on the way home were spotty - no brake lights, passenger turn signal was out, drivers rear light and turn worked, only one headlight worked.

Thanks for this! I have WTCH 3 as far as I can tell, so maybe that’s why it ran even with 24v in the 12v line?

No dice on the metal cable tags, someone has been in here and mangled it all up. I was looking at the schematics, which raised the question on how the PPD is supposed to be wired. Given the other wiring issues, I don’t want to assume that is correct

Hi all, Just picked up a 1998 M-1078 and was working on diagnosing an issue with the batteries not charging. Followed the long and detailed post here which has been very helpful! In doing some cable following and other investigation, I noticed something... weird. the NATO recep was only at...