Search results

If you order one, make sure you open and inspect it while the delivery driver is there. Any damage, refuse it. Out of 4 shipped to me, 2 were damaged. Hopefully the 5th time will be intact.

From what I have heard. Just having a Bill of Sale will not get you a title. If a vehicle coming into PA does not have a good title from another state, getting a PA title can be difficult. But, it can be done if you can find someone that is familiar with the process. As for weights, if the...

So far so good with this one from Jegs. CUCV radiator They are made in the USA by TSM. Thermal Solutions Mfg One arrived damaged right off of the Fed Ex truck, so it was returned.

Changed out the radiator in the M1008 for the 2nd time. First new radiator, the filler spout was damaged in shipping...radiator cap would not seal properly. So I bought 2 new radiators, On one of them, the heater hose connection was damaged in shipping. It went right back to the seller. Also...

I suggest that you contact the MVPA directly to get a clear answer.

I used a regular terminal and made sure that it was not going to cause any issues. $33 each, I hope that included installation..

I looked for days trying to find the P/N for that special terminal. Could not locate one. I even made a trip to my alternator/starter re-builder, they didn't know of a source as well. Sad thing is that I remember seeing one available a few weeks before and I could not remember what place had them.

Once again, the ugly battery connections are present on another truck. This is a M1008 that I purchased 4 years ago. While changing the radiator (another disaster story) I noticed that the battery terminals were attached with the hammer method of crimping. Not being a fan of a ball peen crimper...

Thanks!!! My wife helped as well with keeping Leonard a nice looking machine.

Thanks to all that voted for "Leonard". It truly is an honor to win this award! Karl

I just installed two roof mounted lights inside my M1010. Had to drill a 2 1/4" inch hole for the recessed lights. I used these: Recessed Lights There is about 3/4 of an inch between the inner and outer layers of the roof. There is also a felt type liner between the two metal layers. Fishing...

The last time I filed, you did not need to send photos. But that was a few years ago. The first time I filed for Antique, photos were required. I just read the latest MV-11 and it was revised 3-25. They must have added the photo requirement then. The MV-11V was revised 5-25. Typical PennDOT...

Pictures to PennDOT are no longer required for Antique or HMV tags. We always love to have pictures posted here!

Greetings from Centre County. You can title and register your M35 as an Antique or a Historic Military Vehicle. Both have the same regulations on it's use. I have mixture of Antique and HMV tags on various trucks. I did have a M35A2 with Antique tags so it can be done. Follow the link below...

In

Installed most everything in the engine bay. New radiator, transmission oil cooler, AC compressor, AC plumbing, DC wiring etc. Then the new radiator started weeping at the heater hose connection. So out it came and back to the radiator shop. They fixed it and so far so good. Installed the...

Welcome from PA. I was stationed at Griffiss AFB back in the 80's. On occasion, I get up to Oneida County for work. Might be able to meet next time I'm up there? Post some pictures of your truck, we always like seeing what others have. Picture is from one of the roll over plows I used on the...

I use the Stanadyne. And on occasion, Sea Foam.

F3 F4 Orange wire from the transmission to the kick down switch. .8 ORN-55 wire

The addiction continues. Looks good!!