Search results

MEP-804A, MEP-804B, MEP-805A, MEP-806A Replacement A1 AC Voltage Regulator Features include: • Can be used regardless if factory Voltage Regulator was made by Libby or Technology Research Corporation (TRC) • Replacement for your defective or missing Voltage Regulator... or to have a spare on...

MEP-004A, MEP-005A DC Relay Assembly A5 Replaces NSN 5998-00-201-6015, 69-768, 04306-0209, PEI5470 This is a replacement for the original A5 DC Relay Assembly used in the MEP-004A , MEP-005A, MEP-006A, MEP-007B Brand new design incorporating higher current replaceable relay used in present day...

MEP-004A, MEP-005A, MEP-006A, MEP-009A Control Panel Relay Assembly A4 Replaces NSN 5998-00-202-2888, 69-765, 040306-0210 This is a replacement for the original A4 Control Panel Relay Assembly used in many MEP generators including the MEP-004A, MEP-005A, MEP-006A, MEP-009A Brand new design...

MEP-002A & MEP-003A Exciter Bridge Rectifier Assembly A4 Replaces NSN 5998-01-054-9637, 72-5179 and 332-1371 This is a replacement for the original A4 Exciter Bridge Rectifier assembly used in MEP-002A & MEP-003A generators. Brand new design incorporating diodes with 200% higher current rating...

Remote Start Controller Kit with ATS Control Card Bundle For use in MEP-802A, MEP-803A, MEP-804A/B, MEP-805A, MEP-806A Generators Wi-Fi Remote Control & 2-Wire Start/Stop Remote Start Features include: - 2-Wire Remote Start/Stop interface for use with ATS, Solar Charge Controller, or even a...

MEP-002A, MEP-003A AC Voltage Regulator Replaces 72-5020, 72-5338, 6115-01-037-9650, 6110-01-095-7440 Features include: · Replacement for your defective or missing Voltage Regulator... or to have a spare on hand · Supports both 60 Hz & 400 Hz operation. Comes with jumpers pre-installed for 60...

MEP-802A & MEP-803A Voltage Regulator Replaces TRC 19580, 88-21063, 6110-01-363-0492 Features include: · Replacement for your defective or missing Voltage Regulator... or to have a spare on hand · Works in generators that have defective Quad Windings! · Supports the 802/803's Field Flashing...

Replacement Frequency Trip Switch (S14) Replaces Numbers NSN 5930-01-396-2940, 88-21091, SPS-100-88-21091 Used in MEP-802A & MEP-803A Generators The is a replacement Frequency Trip Switch (S14) NSN 5930-01-396-2940, 88-21091. S14 controls engine Starter Operation as well as Generator Field...

Replacement Governor Controller Module for SLC100 Replaces Part Numbers NSN 2990-01-477-1371, 98-19539, SLC100 Used in MEP-831A & MEP-832A Generators The controller is a custom designed replacement for the 98-19539 Governor Controller NSN 2990-01-477-1371. This replacement Governor...

Remote Start Controller Kit For use in MEP-802A, MEP-803A, MEP-804A/B, MEP-805A, MEP-806A Generators Wi-Fi Remote Control, Monitoring & 2-Wire Start/Stop Features include: • Remote genset Start/Stop via WIFI via cell phone, laptop, tablet • Direct WiFi communication. No router needed...

Could someone measure the AC Frequency of the signal from the MPU to the Electronic Governor Controller on their 804 while it's running? It can be measured at the electronic Governor Controller across terminals 16 & 17. Many thanks!

How is the slip ring assembly removed from a 8MR3005CA Alternator? I need to replace the diode assembly(s) and need to get to rotor out of the housing to do so. This....

In another thread people were interested in how clean the AC output was from various generators as compared to utility power. Below is a compilation of various AC power source waveforms and Total Harmonic Distortion (THD) calculation results. Function generator set at 60 Hz. "Ideal" AC...

Spotted this in a listing for a 1943 M5 Generator on CL. :eek:

Took the opportunity this week to mouse proof my new to me MEP-1030. Here are some pictures of how I went about it using 1/4 galvanized rat wire, zip ties and a bit of RTV. Popped the top off by removing all the perimeter bolts and the ones in the top of it. 10 mm wrench. All have captive...

I'm looking into making replacement A4 & A5 cards for the MEP-003A , MEP-004A, MEP-005A & MEP-006A. I've already designed the replacement A4 for the 004,006,006. Please post up if you have interest in these cards. If there is enough interest in each I'll look into making them. These...

MEP-804A, MEP-804B, MEP-805A, MEP-806A Replacement A1 AC Voltage Regulator Posted this in the wrong section. See my my listing in the Classifieds for info. See link in signature

Looking for someone to measure the DC Exciter Voltage in an 803A when running at 100% Load. Measurement taken at the A1 Voltage Regulator across terminals 5 & 6. Thank you in advance!

My 802A has developed an intermittent starting problem. It has me baffled. I've had it for about 4 years and has always promptly started. It gets used almost weekly to test products I build for the 802/803 such as the Remote Start and an "new" product. Today I was using the 802 to test...

Anyone have a defective MEP-831A battery charger available? I need one I can partly disassemble to do some reverse engineering. I'd pay for shipping. If it's fixable I'll repair it and return it to you. (Posting here instead of classifieds since no one would likely look in the parts wanted...