Search results

It worked. Im all ears. 🤣 Negative on the part. Im not fond of that unit. the electronics are a royal pain.

Is it showing the same undervoltage light or something else?

I connected it to my cat et software and it would not read. Tried same process with another lmtv and that one read fine. Sent it off to ecm king.

Got it. Just toss it then.

Howdy folks. So it seems i have a bad ecm and im currently looking for a replacement. While taking the ecm out, I came across this module that was not connected. Anyone knows what it is?

So it was a perfect storm. Bad S1 and bad dead crank. Swapped both and runs now. I really hate those blue S1 switches.

Looking at the diagram it may be a bad dead crank switch.

Yeah, I checked S1 for power and nothing. My problem is further back the line. Thanks for the suggestion.

Howdy guys. Ive been chasing a power problem with this 805b. I get no power to the emergency stop, s1 or hour meter. As per the diagram, they are all on the same circuit. The panel lights and cim display power up fine. I just need help tracking power into the control panel and figuring out if...

Confirmed: Oil filter: 2914 9200 00 Donaldson: P550162 Fuel filter: Wix 51334 Air filter: 2914 9302 00 DONALDSON P778984 Vbelt: 2914 9218 00 Avr: (UVR6-F)

Thanks. I went to my filter guy and he crossed all in donaldson. Will install to makensure they are correct and post results. Thanks

So I just acquired this same unit and it came with no filters. The manuals have the Atlas part numbers but im looking to cross reference. them. Oil filter: 2914 9200 00 Fuel filter: 2914 8092 00 Air filter: 2914 9302 00 Vbelt: 2914 9218 00 This is my second atlas branded unit. Got a qas 138 a...

Im sure regular srews will do the trick as well but thats a great suggestion. Im sure i have an old box somewhere with old serial cables. Thanks

Hard part will be the screws. They are probably custom for that connector.

Did Larry ever give you that parts list. Ive got 2 004a units that followed me home. Fortune cookie says lots of trouble in my future.

Alright. Problem has been fixed. I removed the sim and tightened all screws on the terminals plugged in the backplane. Got a surprise when I removed the sim. The back screws on the main connector had been snapped into the nuts and it was just pushed into the connector. Running the set for some...

That sender does no ground with a screw to the sender body. Its a 2 pin connector with the ground in one cable. Maybe trace it back to the main grounding point inside the control box. Will check that out.

Hey guys. So i came across a 806b that has an issue i had not seen before. The sender states -6% fuel. Pulled the sender, ohmed it and it works fine. Could it be the backplane receiving unit thats bad?

Thanks K. I looked in the 24p manual and could not find it. Forgot to check with GMG. Thanks again!

Howdy gang! So im having a hard time finding a part number for this oil pipe that comes from the block and into the injection pump. Its just not listed in the parts manual blowout. Any leads?