majorhavoc67
Member
- 66
- 43
- 18
- Location
- Lincoln NE
Are there any corresponding civilian vehicles that have the same lid as the Hmmwv? I've looked in several different places and can't find one that will fit. 2003 M1035A2 NA 6.5
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Brake Reservoir lid
- Thread starter majorhavoc67
- Start date
- 7,726
- 10,887
- 113
- Location
- Papalote, TX
Take a picture of the master cylinder and post a want in the classifieds.
A picture here would have helped.
A picture here would have helped.
majorhavoc67
Member
- 66
- 43
- 18
- Location
- Lincoln NE
I already posted in the classifieds, but I will add a picture as soon as I can. Thank you.
Attachments
- 5,845
- 3,375
- 113
- Location
- Metairie/La (N'awlins)
That is a gm style master cyl lid.
Check the doorman catalog and see if you can match.
Check the doorman catalog and see if you can match.
- 7,726
- 10,887
- 113
- Location
- Papalote, TX
The way it has been exposed by having no lid and the lines disconnected I would plan on sourcing a new one, pretty important part.
Also it is unusual to see an engine with a serpentine belt not to have the 14V tap on the regulator connected, that is a 4 speed truck by model number.
Also it is unusual to see an engine with a serpentine belt not to have the 14V tap on the regulator connected, that is a 4 speed truck by model number.
- 3,994
- 4,173
- 113
- Location
- Brooklyn, NY
Just a standard lid. Bring the top with you to the store.
Temporarily just cut a sheet of pliable silicone sheet 1/16” thick to get you where you’re going.
Temporarily just cut a sheet of pliable silicone sheet 1/16” thick to get you where you’re going.