brush guards that will clear this hood scoop. Need Limb Risers

[EVANSWASTEOFMONEY]

I think this will work https://modmafia.com/product/mod-mafia-spec-brushguard/

This doesn't have enough corner coverage. https://predatorinc.com/shop/hmmwv-hd-expedition-brush-guard/ Would be ideal if it only covered up a little higher.

I am attaching limb risers from brush guard to the led rack. These things are wider than the jeeps and rovers that go. I always end up clearing the trail.

 

[TOBASH]

DIY. Members here weld them up all the time. If it wasn’t raining today, I would be welding up my new brush guard.

 

[EVANSWASTEOFMONEY]

Sadly time is money. I would be too far in the red to even consider it.

 

[Bulldogger]

I think this will work https://modmafia.com/product/mod-mafia-spec-brushguard/

This doesn't have enough corner coverage. https://predatorinc.com/shop/hmmwv-hd-expedition-brush-guard/ Would be ideal if it only covered up a little higher.

I am attaching limb risers from brush guard to the led rack. These things are wider than the jeeps and rovers that go. I always end up clearing the trail.

Interesting. I didn't know Pontiac made a Ram Air induction system for HMMWVs.

 

[TOBASH]

Honestly, I would eliminate the ram air. This isn’t a 455 HO TA.

 

[Cain2003]

I have the carbon fiber hood scoop from predator and the modmafia spec ops brush guard, they both fit perfectly. I planned on adding a QD limp riser set up using light mounts meant for mounting spot lights to round tube. they'll have the hole to bolt on the cables without welding anything permanent, and if you want to adjust how/ where they mount, it'll be straight forward.