MEP 002A/003A PARTS

[metalworker393]

Hello and how are you all doing .
So I have a 003a machine I wanted to change over to an sx 460avr and set it up for 240v single phase. That mod came to an abrupt halt.
So now I need the wire harness that plugs into the cubicles and to the engine.
My dog decided to chew the harness up while I was at work . He was a little over a year old and was getting quite destructive .
I know these machines are getting a little long in the tooth, but I would still like to complete this conversion .
There was a guy down south that used to part these machines out but I can't find his info, or remember his company name.
If anybody has a wire harness from a machine they are parting out , can you drop me a line .
Thanks, metalworker393

 

[Ray70]

Hello, I have a parts machine as well as some spare harnesses on the shelf. Let me take a look and see if I have what you need.

 

[Ray70]

I have the harness you need on my parts shelf, confirmed it tonight.

 

[metalworker393]

Hello Ray how are you ? How much are you asking for the wire harness ?
This machine I was going to try and set it up to be strictly 220v single phase and use an SX 460avr.
After my puppy ripped out the wire harness the project stopped dead in its tracks.
I do have a copy of Craig Tulls schematic on what he did .