New M561 in family

[Karl kostman]

……..I’m curious about the result …….looks really perfect

Words to live by!

 

[DotusPL]

A lot of time has passed... I managed to buy and renovate an M37, bought an M422, and the goat was still sitting on a slope.

Time to push it forward....


this is what I have done in recent years

 

[DotusPL]

I figured out a way to fix that awful aluminum.....

everything is cut, it will be cleaned with a laser... then the next steps

 

[G744]

Is your Detroit an iron or aluminum block?

G744

 

[DotusPL]

Is your Detroit an iron or aluminum block?

G744

aluminum. On the previous page you have photos of the engine after cleaning.

 

[cgraham1]

Hi to all
I joined a family of M561 owners

The time has come to start a new project which will probably be a long way ...
I have a bit more difficulty than you guys because I live in the EU and the metric system does not help with that
My M561 is from Italy and was produced in 1972
I will probably have a lot of questions and I hope you will help me a little
Another report from the renovation on the SS forumView attachment 813262View attachment 813263View attachment 813264View attachment 813265

Hi to all
I joined a family of M561 owners

The time has come to start a new project which will probably be a long way ...
I have a bit more difficulty than you guys because I live in the EU and the metric system does not help with that
My M561 is from Italy and was produced in 1972
I will probably have a lot of questions and I hope you will help me a little
Another report from the renovation on the SS forumView attachment 813262View attachment 813263View attachment 813264View attachment 813265

You should look into joining the M561 group on Facebook.

 

[G744]

All those FB Goat owners should join up here instead.

Lot less noise.

G744