JimC2
Well-known member
- 271
- 255
- 63
- Location
- Collierville TN
What units are recommended that allow retention of the stock steering wheel and Pittman arm?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Power Steering
- Thread starter JimC2
- Start date
- 1,910
- 4,390
- 113
- Location
- Hidden Valley, Az
The best one I ever saw some 40 years ago was a hydraulic torque amplifier unit mounted under the dash.
It was on beefy homemade brackets, and the stock steering shaft was customized to fit. They used the stock steering box.
I didn't get to see the pump/reservoir, but that would be academic anyway.
The thing looked more-or-less cylindrical, about 6" diameter, 6 or 7" long, shafts out each end. Pretty neat job.
In later years, I saw the same tech used in bigger dunebuggies in the Yuma dunes.
PoW
It was on beefy homemade brackets, and the stock steering shaft was customized to fit. They used the stock steering box.
I didn't get to see the pump/reservoir, but that would be academic anyway.
The thing looked more-or-less cylindrical, about 6" diameter, 6 or 7" long, shafts out each end. Pretty neat job.
In later years, I saw the same tech used in bigger dunebuggies in the Yuma dunes.
PoW
Roller
Active member
- 203
- 86
- 28
- Location
- North Lake, WI
