Search results

I was born and Raised in Corydon Indiana now an Ohio transplant welcome aboard

https://www.steelsoldiers.com/threads/mep-803a-spring-cleaning.187740/ see this post

No issues will keep out mice nicely as well, but make sure you cover the hole in the bottom of the generator and just make sure leaves dont build up. Looks good other wise

Napa and Oreilly definitely will order them

They are all over the place, just and oring most new filter elements probably come with one Filter is Fram C1125pl or Napa 3113 FYI you should always have an extra set of filters and basic maintenance parts on the shelf Good luck

I dont own an 003 but according to the parts manual 5330-00-663-4773 parrt number 149-1482 Baldwin G344 Specifications: O.D.: 3 9/16" I.D.: 3 5/16" Length: 1/8"

I see one lever and the cables on ebay

If your looking for the drum or fuel can adapters i am the one that sells them on the big auction site. PM me i can help you out

According to Diesel Parts direct looks like its been superceded by part number Isuzu IZ-7552395870 Still and Isuzu part has to be ordered direct $261 dollars. I will keep searching, but i think this weekend, i am just going to pull a pump off the shelf that i have thats 24v hopefully 6psi would...

I had a customer wanting my last 802a and after digging it out of the snow, batteries were weak, 4 degrees outside so i hauled it up next to the drash unit to Slave the batteries since i cant find my 24v charger with a nato plug on it. I did not get the 802 started untill tonight when i...

i took a rolling chain comealong and hooked to the shackles on the back of the truck and then to the bar and just cranked up on it the upward angle of the shackle was enough to pull it into place then used a drift pin put a bolt in and then did the other side.

Been a couple of years since i did mine but it did not seem that difficult. Are your bushings freezing cold? i did mine in the summer so they were nice and warm so maybe a little more flexible?

4520-01-411-8740

bump

bump

Thats some expensive propane. Just filled up saturday before the big storm for $1.59. Hope you find the Generator that suits you. Personally have a soft spot for my AMMPS 1040 as its more fuel efficient. PM me if interested in a new one

Looking at how bad that hose is your going to want to change the return lines soon as they will be leaking soon, or it may be too rotten to reconnect to the new line you are buying. Call me Colt precuts them and sells them on ebay as well, or gates hose from oreilly or VW fuel line. lots of...

https://www.ebay.com/itm/153945930466?_skw=lister+petter+fuel+line&itmmeta=01KFM4S4GN9BFHZ8724K7PPB39&hash=item23d7e47ae2:g:W6gAAOSwHyxm2WYJ&itmprp=enc%3AAQALAAAA0O7PUuNWmJ%2B%2BUShgI9tQz%2FqGWiXzh6Uld8uSFKLNJ4LuPWrS8pYXqszEq1757ELv5vsfVjL5cVRWATWXnrz243ENYs6ptVBCfXb7KX5fX8hLvgq%2FRKBAPgPzrlyPX4n...

The diagram you are showing is the return lines off of the injector nozzles, the pictures are of the other end going to the metering pumps

Big update, All systems have been closed up, I now have a new compressor and filter dryer. a larger filter dryer was installed because it was on our shelf at the office, and i had to replace the flex line coming off the compressor since it fell apart while desoldering the old compressor. Unit...