Deuce replacement tires

[Oldg]

What’s everyone doing to replace the 20” NDTs ?

 

[98G]

Scrounging 9.00R20s one at a time.

Or going to 11.00R20, 12.00R20 or 395s all at once.

The latter requires a wheel swap..

 

[NDT]

Same here. The 9.00's come out on Govplanet every few weeks and I scoop them up in my area.

 

[marchplumber]

What’s everyone doing to replace the 20” NDTs ?

Switched over to 11x20.....former five ton tires....,drive and grip well......no complaints from the Raven deuce. GOOD LUCK

 

[Oldg]

Scrounging 9.00R20s one at a time.

Or going to 11.00R20, 12.00R20 or 395s all at once.

The latter requires a wheel swap..

Thanks seems like any 20” tires are all gone. Where is everyone getting rimes at?

 

[98G]

Thanks seems like any 20” tires are all gone. Where is everyone getting rimes at?

There are a number of rims that fit. One of the better solutions is to go to 395s on MRAP rims with 10lug to 6lug adapter plates.

This is still a 20" tire though.

 

[marchplumber]

Might try CSM Army tires, site sponsors, Memphis, Eastern, aint cheap, but pound of hamburger is over 6.00 here. Ugh!

 

[John S-B]

What’s everyone doing to replace the 20” NDTs ?

I bought some Deestone NDT's new online, they were just under $220 for 8 ply. They seem a tad taller and narrower than the Titan's that were on there, but those tires were pretty old and worn. Cost me about 3K with shipping for 8 of them. I had three really good ones that didn't need replaced, that's why I got only 8. Next year I'll probably get 3 more since I don't drive the deuce every day.

 

[tobyS]

Thanks seems like any 20” tires are all gone. Where is everyone getting rimes at?

I have some A3 rims 11" x20 not sure quantity ???

 

[John S-B]

What’s everyone doing to replace the 20” NDTs ?

Giga Tires is who I got my tires from. Made in Tailand, but since it's not a daily driver, I don't need top of the line tires. Coker in Memphis was 800+ for 8 ply, over a grand for 12 ply...