• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Gen 2

T_F_E

New member
207
0
0
Location
Metaline Falls, Washington
Ok so my gen 2 light is very dim, actually I can't see it at all in the day light. To turn it off and move the voltage gauge into the green I have to rev the sh** out of my motor. Both alternators were rebuilt less than a year ago. My gen 1 light is bright and just takes a light tap of the pedal to go out, that is the way gen 2 use to be. Belts are all tight. I'm pretty clueless when it comes to electrical so any help would be much appreiciated.

Thanks all!
Mike
 

Stihl029

Member
112
1
16
Location
Kodiak, AK
Mine has been doing the same, I have looked into it just a little, however the gen 2 is not charging. I have just been hooking it up to a charger a few times a week and rolling with it till I get a replacement gen 2 in.
 

D10

New member
24
0
0
Location
so. california
i am having same problem. havent checked relay yet if it is bad where can you get another one, and how will you know if it is bad?
 

DaGlitch

Member
47
0
6
Location
Albuquerque / NM
Yea, you can get them at any napa, advance auto parts, autozone. You could perform a couple of tests on them, but for $5 bucks a piece it's worth it to just replace it to rule that out.
Trying to find a part number, and will post back when i do.

GM PART # 356284
 
Last edited:

D10

New member
24
0
0
Location
so. california
thanks for that part # i took mine off nothing looked burnt but it is really dusty in there so for a couple of bucks i think ill replace it
 

DaGlitch

Member
47
0
6
Location
Albuquerque / NM
thanks for that part # i took mine off nothing looked burnt but it is really dusty in there so for a couple of bucks i think ill replace it
Not a problem. I couldn't find the napa or autozone part numbers, but they should have em. I just replaced both of mine as well, and it solved a whole bunch of problems :)
 
Top