• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HUMVEE Radiator replacement

williamh

williamh

Well-known member
521
730
93
Location
SanDiego Ca.
What a disaster. First when getting ready to pull the hood , I disconnected the hood prop and a gust of wind pulled it out of my hand and went fdw and cracked the fiber glass where the mounts are. Good thing I got a spare hood. Got the radiator in bolted and it took 2 to pull it out , heavy as hell. After sitting for at least 4 hrs. It still has antifreeze still in the passes. Defiantly plugged up
 

Attachments

Retiredwarhorses

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,727
4,914
113
Location
Brentwood, Calif
williamh said:
What a disaster. First when getting ready to pull the hood , I disconnected the hood prop and a gust of wind pulled it out of my hand and went fdw and cracked the fiber glass where the mounts are. Good thing I got a spare hood. Got the radiator in bolted and it took 2 to pull it out , heavy as hell. After sitting for at least 4 hrs. It still has antifreeze still in the passes. Defiantly plugged up
Click to expand...
that’s an early version of radiator, the round tube were a bad design
 
williamh

williamh

Well-known member
521
730
93
Location
SanDiego Ca.
I had ordered a new radiator over a year ago and just started to install it. All the nutserts are metric 🤨 and not 100% in the correct spot. That’s fine , in and out 3 times to get all the correct bolts in the right spots and of corse the inlet is off by 2”. Spent a little time at Napa and found a hose that would work by cutting several inches off. I included the new hose part number for future reference.
 

Attachments

Retiredwarhorses

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,727
4,914
113
Location
Brentwood, Calif
williamh said:
I had ordered a new radiator over a year ago and just started to install it. All the nutserts are metric 🤨 and not 100% in the correct spot. That’s fine , in and out 3 times to get all the correct bolts in the right spots and of corse the inlet is off by 2”. Spent a little time at Napa and found a hose that would work by cutting several inches off. I included the new hose part number for future reference.
Click to expand...
you ordered a radiator for an H1, not a HMMWV
 
You must log in or register to reply here.
115,384members
167,864threads
2,365,159posts
792online users
Top