Impact socket

[Levi75]

Hello to you all!
I was wondering if anyone knows where to get an impact socket for the square lugs on the rear that would fit a 1” impact?
thank you!
Levi

 

[NDT]

Zoro has them:
STEELMAN PRO Impact Socket : - 79325

 

[Guyfang]

I have moved this post to the right Forum

 

[Levi75]

Thank you all! How does this socket attach to a 1” drive?

 

[Mullaney]

Thank you all! How does this socket attach to a 1” drive?

.
It just snaps onto the driver or extension.

 

[Levi75]

I attached a picture of the part number you all kindly gave us, according to the picture one side is hex and the other square. My impact has 1” male square and the lugs are 13/16” square. Thank you!

 

[NDT]

What I linked is the combo Budd socket that removes the outer 1.5” Budd nut and the inner square stud nut. The also have versions that are only for the inner.

 

[Mullaney]

I attached a picture of the part number you all kindly gave us, according to the picture one side is hex and the other square. My impact has 1” male square and the lugs are 13/16” square. Thank you!

.
Right. It is a dual purpose socket. 1 1/2 inch and 13/16 Square. I guess it needs to be rotated in the picture... 1 inch square drive on the other end. Budd Wheel Socket.

 

[Levi75]

Ok thank you very much! I found the one that goes from 1" to 13/16" square. its part # 79333 and about $25.00 after shipping
Thank you all!