M915A1 Dump transformation

[panzerwillie]

Time to drill also took out front axle of for the 20K air Disc

 

[panzerwillie]

Tag axle bolted more to follow

 

[panzerwillie]

 

[panzerwillie]

A week of work more to follow

 

[silverstate55]

Looking GREAT so far! Excellent work!

 

[panzerwillie]

Thank you put the 20k front axle today with out the rotors and calipper as well center link to make it lite enuff to help with moving a lot left but was good week

 

[panzerwillie]

Ok Boys & a Girls work on it today for few hours put the Disc with new sesls torque to factory specs it has cone spacer between the bearings wich makes it easier , have not put calipers and brackets yet but will follow soon just wanted to see it with the 425/65/22.5 this axle is about 3 inch wide hub face to hub face but looks good at the end i made run 385/65/22.5

 

[panzerwillie]

More to follow

 

[panzerwillie]

Well work on it for a few hours . Started with the replacements of rear hubs to hub sentric ,had to make a quick tool because at least one of the two on driver side was stuck like CHUCK next week will tackle the other side..

 

[panzerwillie]

All pilot hubs are inn hopping to more blast frame and possibly paint

 

[panzerwillie]

Some blasting today hope to paint tomorrow

 

[SCM35A2]

Subscribed for updates!

 

[panzerwillie]

First code Boys and girls

 

[panzerwillie]

Coat i ment

 

[US6x4]

There's a little drop down menu in the bottom-left of your post that will expose an "edit" option that allows you to correct the original post (see below)

 

[panzerwillie]

Thank you

 

[panzerwillie]

All done for the weekend even do i took Friday and Monday off, going to work on a generator at home ,more to follow

 

[panzerwillie]

Is being a while i beinng bussy with work getting ready for huracane season , well finally front axle is bolted in with with clearance issues but is in

 

[panzerwillie]

Getting 3rd axle in place will continue next week

 

[panzerwillie]

Well i can not use the axle i bouth the tag axle is 34" center to center the tag axle kit i bought is for 32.5"-33" the 4 hole support brackets will not line up will look for another however front calipers are on..