New member from SoCal

[CA-Deplorable]

What is a decent size/dimension of an enclosed structure to house an M35A2 and also have a workshop in it. And if there's a cement slab, how thick would it have to be? Thank you in advance.

 

[Mullaney]

What is a decent size/dimension of an enclosed structure to house an M35A2 and also have a workshop in it. And if there's a cement slab, how thick would it have to be? Thank you in advance.

.
Well... I guess it kinda depends on how much space you need to work around the truck. Me personally, I would add 5 feet on all four sides. that way you have enough room for a wheel dolly if you come across one. I suggest 4 inches on a well packed base of 5000# concrete.

Bumper to Bumper (assuming with winch) measures 328.7 and 97.5 width, Excluding Mirrors.

 

[CA-Deplorable]

.
Well... I guess it kinda depends on how much space you need to work around the truck. Me personally, I would add 5 feet on all four sides. that way you have enough room for a wheel dolly if you come across one. I suggest 4 inches on a well packed base of 5000# concrete.

Bumper to Bumper (assuming with winch) measures 328.7 and 97.5 width, Excluding Mirrors.

Thank you for your quick response. I do have room for a 20' by 40' structure. I'll just need to be sure to have a roll-up door tall enough to bring the MV into the structure.

 

[Mullaney]

Thank you for your quick response. I do have room for a 20' by 40' structure. I'll just need to be sure to have a roll-up door tall enough to bring the MV into the structure.

.
Good Deal! I checked the dimensions for the max height in at 118.3
It can be reduced by removing the exhaust pipe and folding the windshield if you need to go into a tight space.

 

[CA-Deplorable]

.
Good Deal! I checked the dimensions for the max height in at 118.3
It can be reduced by removing the exhaust pipe and folding the windshield if you need to go into a tight space.

I have no problem getting a structure with an 11' or 12' roll-up door but I will pay attention to the width of the entrance. This will help when i have to insure the vehicle in order to get a cheaper yearly rate. Presently, i have insurance that does not require me to have the vehicle garaged but it costs more for my enjoyment here in California. Thank you again.

 

[Mullaney]

I have no problem getting a structure with an 11' or 12' roll-up door but I will pay attention to the width of the entrance. This will help when i have to insure the vehicle in order to get a cheaper yearly rate. Presently, i have insurance that does not require me to have the vehicle garaged but it costs more for my enjoyment here in California. Thank you again.

.
Yes sir! It should definitely cost a little less to have it in a garage.
Sadly, my collection sits out in the yard...
Front yard and side yard too.

Nothing like having a place to work inside!

 

[Semper Gumby]

Welcome aboard

 

[marchplumber]

Welcome aboard from Central Illinois

 

[Tracer]

Welcome aboard from N/W Nevada.

 

[SCM35A2]

Welcome to the site!