Shop Set Contact Maintenance Truck (Heavy) (CMTH)

[Mogman]

There sure doesn't seem to be much information out there on these, I picked up a CMTH today that I will be using on a beater M1097A1 as a farm maint. vehicle, it was pretty stripped only having the inverter, what ever is above it and a few drawers, I have a gas powered compressor, a gas powered welder, torch, and will likely try to get one or more of my air powered 16 gal dispenser units, hydraulic fluid and or gear oil and or chassis grease along with possibly a diesel tank with pump if I can cram it all in there.

 

[aghumvee]

Is that an air compressor above the inverter? is it 3 phase?

Yes, it is a air compressor but its basically good enough to air up a lawn mower tire as it has no tank for volume. It does run off the inverter. Cant remember if its 3 phase or not.

 

[aghumvee]

There sure doesn't seem to be much information out there on these, I picked up a CMTH today that I will be using on a beater M1097A1 as a farm maint. vehicle, it was pretty stripped only having the inverter, what ever is above it and a few drawers, I have a gas powered compressor, a gas powered welder, torch, and will likely try to get one or more of my air powered 16 gal dispenser units, hydraulic fluid and or gear oil and or chassis grease along with possibly a diesel tank with pump if I can cram it all in there.

We use 2 of these maint. boxes on humvees for our farm. One of them has 50% of its original issue tools and inverter, compressor and the arc welder.

@155mm just put together a maint. humvee as well.

 

[155mm]

We use 2 of these maint. boxes on humvees for our farm. One of them has 50% of its original issue tools and inverter, compressor and the arc welder.

@155mm just put together a maint. humvee as well.

Mine is still very much a work in progress, compressor was 220v thru 24v inverter, i used a 24v 150 psi and added a tank for volume. I will try to answer any more questions, just tag me as iam not on muchj@aghumvee was the expert on the welder wiring

 

[Mogman]

Well someone missed the 4 brand new Victor regulators, there is a little box with a lid that had 2, O2 regulators, 1 EA acetylene and shield gas with a flow indicator.
It looks like I will be able to get my miller roughneck welder, the gas powered compressor, of course a torch and think I will have enough room to stuff a MEP-831A gen in there, and still have a few drawers for tools, the drawer setups are pretty stripped but enough to make up 1 if not 2 sets of drawers.

No information on the inverter that I can find, really strange though, it has a three phase breaker, but it appears to have 4 power modules....there is only a single 115V input for external power.