WTB: M116A2 trailer parking brake handles

[mikev]

Anyone have a pair of new/used parking brake handles for a M116A2 trailer (the one with 8 lugs - CUCV tires)?

My trailer has the MEP003A 10K genset on it and the knobs on mine froze up and I cannot adjust the parking brake cables...

The handle needed has a pulley in it, sides are "angle cut" at the end and are mounted with 2 bolts near that angle cut.

NSN 534009365284

Part 10926073

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

Would be interested in a pair of new/used brake cables too

NSN 2530011687906

Part 11686101 (69 inches)

I've already searched eBay, Eastern Surplus and the 'net with no results...

 

[Tinstar]

I have a set
Brand new direct from manufacturer.
The correct ones.
PM me

 

[FarmingSmallKubota]

I see one lever and the cables on ebay

 

[mikev]

I see one lever and the cables on ebay

"Ouch" - he wants $155 or Best Offer for the handle...

And only one left...

 

[Tinstar]

Direct from manufacturer is not much under that figure.

But you can buy as many as you want.

 

[Tinstar]

Just FYI, almost all of the M101 series brake cables you see for sale are for the M101(A1) trailers.
The M101A2/3 requires a different cable and those will not work.

 

[Tinstar]

M101 Trailer Series: Brand New Brake Levers

FINALLY!! found a brake lever supplier with the help of Guyfang. Their pricey but available. $140 each including spacers. Bolts are not included. Kratzke Machining & Fabricating Company Wittenberg, WI 715/253-3800 They make two different levers. One is a single pull and one is a double...

www.steelsoldiers.com

 

[Guyfang]

Just FYI, almost all of the M101 series brake cables you see for sale are for the M101(A1) trailers.
The M101A2/3 requires a different cable and those will not work.

Part of the problem, is that folks do not know what a UOC is. Usable On Code. The UOC tells you what part, fits what model of trailers. When ever using a -24P, it pays to first read up about the UOC for the equipment you are looking for parts. Back in the day, when I had a kazillion paper TM's, I wrote the UOC on the cover of all my parts TM's. Or used a highlighter on the CORRECT information. That way I never had to find the UOC again. The M101 series trailers may look kinda alike, but there are a LOT of differences.

 

[mikev]

Tinstar came thru with a pair to sell me! Thank you Tinstar!!!

Would like to get a second pair as "spares", so they don't have to be "pretty", but the adjusting knobs MUST be free (not "frozen") and not torn up from pliers/vice-grips used on them...