Search results

Checked switch, good. Checked protective control box, good. Truck will run if starter is jumped, will shut down if ignition switch is flipped off. At a loss to what is wrong.

2nd annual Heavy Duty Hero's November 9,10,&11th https://www.visitbeauvoir.org/

2nd annual Heavy Duty Hero's November 9,10,&11th https://www.visitbeauvoir.org/

Positions filled, thanks guys.

Looking to hire 4-5 Humvees and their drivers $500 a day to deliver diesel to generators. Need 100 gallon tank and electric pump with meter. Call CSM Davis 601-2six4-3453

Here you go, and there are others. http://www.steelsoldiers.com/showthread.php?t=125265

Ran across the video, then looked up SS post about it and here you are! Good vide, hope you find a buyer that can put that engine back in a good Champ. Think you got a diamond in the rough when you bought it. Good save.

Going to have another Military Vehicle rally at Beauvoir on Veterans day, come on down!

Sounds like you just volunteered to start it!

Other than the data plate (which is blank on mine) is there anywhere else I might find a manufacturer stamped number?

Where did you get the box?

Did you ever get this fixed?

I would suggest getting a new axle with your jeep wheel lug pattern and maybe mount it over the springs like older jeep axles were mounted. That should bring it way down. Also on the wheel issue those on your trailer now are hard to find combat wheels $$ unless you feel generous and donate them...

It is a M101, 3/4 ton trailer. Looks like the axle may already be upgraded to A2 type could not see the wheels very well.

Think I see a problem already right above the banjo fitting on the lift pump there should be a sensor there or it should be capped off.

Yeah didn't think about it till now but you could take a wrench to it if you wanted.

Anybody know what pads they staying at?

Alternative Part Numbers CARQUEST or Stant 10294 NAPA 703-1427 Ideal Tridon 46028 NAPA Belts/Hose 31350 Edelmann 46028 Edelmann ETRC-104 Robertshaw RTRC-104 Carquest 33027 Motorad 1006-15 Dayco 82914 ACDelco 12R4 ACDelco RC-25 Stant 10294 Stant 11294 Stant 46028 Stant TRC-104 Gates 31350...

Yeah seams like everyone uses bendix nomenclature to describe the valves out there. But what's odd is the smart guy at the parts house that doesn't live by what the computer says gave me a pp1 because I only use have 2 lines going to my valve and said doesn't need a pp7 and I believe that he is...

Okay it's a PP-7 but still don't know exactly which manufacturer or part number.