- 941
- 1,481
- 93
- Location
- La Crosse, WI
That is a great step! Allison doc, abs software, Dana CTIS all very useful. Demilitarized makes laptops with those and the technical manuals
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MTVR turns over but won't start
- Thread starter sandcobra164
- Start date
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
I believe loast the information from the ECM when I connect the ET from cat is asking me to flash the ECM does someone have the files
- 941
- 1,481
- 93
- Location
- La Crosse, WI
If it sees the ecm that's really good news. The older ecm configurations could loose memory when the battery failed. Newer flash files hard write that needed info.
Demilitarized has the needed files on his site. Watch some YouTube videos on the process.
You'll want to get the injector codes programmed at some point (written on the injectors)
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
shit my cat et only was able to see the ecm couple times so i decide to flash and im not sure with i did right was kind stupid of me
- 941
- 1,481
- 93
- Location
- La Crosse, WI
When these things are like $4k (plus programming) from CAT it pays to be careful.
- 551
- 1,219
- 93
- Location
- Gainesville, GA
The correct files are on my website southeastmilitaryequipment.com/mtvr
Configuration file may need to be flashed but be sure to flash the stock 410hp tune first and then set up config and make sure you have cat password generator for 10 digit.
Sent from my iPhone using Tapatalk
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
Just a update I find out was my ECM was bad now I'm trying to figure out the cheapest way to fix ...I appreciate the help from everyone here I keep u guys updated, my ECM was. Not reading right ..
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
Finally truck is working perfect now was my ECM was bad I try to bring back but was way to bad I got universal ECM and flash with the files and config works like a champs tnx everyone for the help here I use cat et to put new flash files and config
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
I install the stock files should I put the 505 one ?
- 551
- 1,219
- 93
- Location
- Gainesville, GA
The injector trim files for that config are way off to a "universal" injector trim.
- 551
- 1,219
- 93
- Location
- Gainesville, GA
505 with incorrect injector trim files is a bad idea
euclides5370
Member
- 46
- 4
- 8
- Location
- walnut creek ca
All right then so I just going to keep the original fire them the stock version
- 941
- 1,481
- 93
- Location
- La Crosse, WI
Pull valve covers off and get the trim numbers off the injectors