- 4,328
- 4,295
- 113
- Location
- Peoria, Illinois
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Operation Medi-Betty: Kendelrios 1967 M725
- Thread starter kendelrio
- Start date
67Beast
Well-known member
- 1,006
- 582
- 113
- Location
- Silver Lake Sand Dunes MI.
Ken, it turned out great. Thanks for the kind words on my paint mask kits. For anyone looking for marking can check out my decal site at http://www.deltateamdecals.com
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Yesterday was troubleshooting the brake light system. They worked, then suddenly they didn't. I checked all of the wiring and narrowed it down to the switch. I was getting 12v when I pressed the brake pedal, but no amperage. I couldn't imagine a simple mechanical switch failing in that manner.
Upon investigation, I found that the previous mechanic had "repaired" the wires going to the switch and had used stiff connectors on a 90° bend, and only 2 strands of metal were making the connection:
So I built a new wire connection with some good, water tight flexible connections.
After that it was time to do a little customization.
My daughter (who is the ultimate recipient of this truck) has no desire for blackout lights, so i didn't bother wiring them in.
I was looking at the BO drive light and had an idea.
I took this LED:
A dremel and extra wiring and a knob.
Putting it together with sealant after cutting the hole:
Wired it up and voila:
Next is setting timing and putting wire covers for the tail lights on etc
Upon investigation, I found that the previous mechanic had "repaired" the wires going to the switch and had used stiff connectors on a 90° bend, and only 2 strands of metal were making the connection:
So I built a new wire connection with some good, water tight flexible connections.
After that it was time to do a little customization.
My daughter (who is the ultimate recipient of this truck) has no desire for blackout lights, so i didn't bother wiring them in.
I was looking at the BO drive light and had an idea.
I took this LED:
A dremel and extra wiring and a knob.
Putting it together with sealant after cutting the hole:
Wired it up and voila:
Next is setting timing and putting wire covers for the tail lights on etc
- 8,433
- 21,236
- 113
- Location
- Charlotte NC
.
Good Deal!! Glad to hear that you found the bad spot in the wiring.
It makes you wonder though... Why?
- 18,730
- 28,630
- 113
- Location
- Burgkunstadt, Germany
People like that, I refer to as "Hobby Electricians". Faults like that can drive you mad.
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Trust me... after some of the "repairs" this "professional" shop did, I would fire them all. Multiple wire runs using the same color wire for power and ground, among other things.
This work was done by a "professional" shop that specializes in restoration.
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
So, got a chance to put the old timing light on her as I knew she was advanced....
8-10° BTDC is recommended.
She was around 12° AFTER TDC. Almost 25° out.
Brought her down and adjusted the idle and she runs much more.... calmly.
(Engine is off in this pic)
8-10° BTDC is recommended.
She was around 12° AFTER TDC. Almost 25° out.
Brought her down and adjusted the idle and she runs much more.... calmly.
(Engine is off in this pic)
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Also was playing with AI...
No AI
After AI
No AI
After AI
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Added a detail...
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Today was new glass. The windshield had a LOT of delamination going on...
So we went to a local glass company..
And about an hour later...
So we went to a local glass company..
And about an hour later...
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
Got back to the shop and decided to add the year...
- 2,989
- 9,895
- 113
- Location
- Alexandria, La
- 4,328
- 4,295
- 113
- Location
- Peoria, Illinois
In "public" even!
LMBO